Unit Production Instructions
Cut piece no. 1 with 30 degree angle on the Z axis of the right side and a straight cut on the left side.
Cut piece no. 2 with 10 degree angle on the XY plane on the right side and a straight cut on the left side.
Cut piece no. 3 with 30 degree angle on the Z axis of the right side and the left side.
Cut piece no. 4 with a straight cut on the right side and a 10 degree angle on the XY plane on the left side.
Cut piece no. 5 with a 30 degree angle on the Z axis of the left side and a straight cut on the right side.
Attach pieces with 10 degree rotation, using the middle convex curve of the molding as a pivoting point.
Variations (In order of pictures):
2 . For pieces 1, 3 and 5, add a 10 degree angle on the XY plane.
3. Continuing from previous variation, for pieces 1 and 3 add another 10 degree angle on the XY plane on the other side, plus a 30 degree angle on the Z axis.
4. Continuing from previous variation, incrementally increase Z angle going from left to right throughout the unit.
5. Continuing from variation no 3, incrementally increase XY angle going from left to right throughout the unit.
No comments:
Post a Comment